Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
Four strands PVC pipe machine four strand PVC pipe extrusion line
This four strands PVC pipe machine four strand PVC pipe extrusion line can produce the pipe size 32mm. this four strands PVC pipe machine four strand PVC pipe extrusion line is with big capacity, it is 4 production lines, can produce 4 pipes at same time. So the capacity is high. The pipe size is: 16-32mm diameter.
please check below machine pictures for your reference:
Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

Material :                           PVC (polyvinyl chloride)
Pipe size range:                     Ø16~32mm
Operating direction:                 from right to left
Center height:                       1000 mm
Machine color:                      Xinrong standard color (white)
Cooling water consumption:           8 m3/h  ( ≤20ºC,≥0.3MPa )    
Tank volume:                     12 m3 
Compressed air consumption:      0.5 m3/min ( >0.5MPa )
Total power:                         165kW
Actual power when operating:        100kW
Overall dimension:                   31000×3000×3000 mm
Control system:                   RKC temperature controller, Japan 
DC speed regulator:                Eurotherm, U.K 
Inverter:                     ABB or BOSCH-REXROTH
Low voltage electrical parts     
Button, switch                 Schneider, France 
Contactor                    Schneider, France
Air switch                     Schneider, France 
Intermediate relay             Schneider, France
Temperature controller          RKC, Japan
Heater                        magal alloy ceramic heater
l    Circumstance: 
Working place:               indoors
Power supply:                no dangerous area
Temperature:                 0-40ºC
Humidity:                    85% no condensation

Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line


Vaulted cover, no distortion. National patent for principal axis airproof device. 
Self-friction or electric heating and steam heating function of the hot mixing.
•    Total capacity:                     200/500 L
•    Effective capacity:                  150/320 L
•    Vane rotation speed:                475/950/130 rpm
•    Motor heating power:                30/42/11 KW
•    Water consumption:                 4 t/h
•    Heating method:                    self-friction or electric heating
•    Discharge method:                  pneumatic or manual
•    Dimension (L×W×H):                3000×1500×2000 mm
•    Mixing time:                        10-12 min/pot
•    Cooling time:                       10-12 min/pot

Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

•    Screw, barrel:                    38CrMoAlA, nitriding and polishing,                                             depth of nitriding: 0.45-0.65mm,                                                 surface hardness HV800-900;                                                 with vacuum exhaust device,                                                    vacuum exhausting power: 2.2 kW
•    Sensor:                         PT131B, 50MPa; power 24V, output 0-10V 
•    Screw diameter:                 65/132 mm
•    Screw rotation direction:           different direction outwardly
•    Drive motor power:                  37 kW, AC motor
•    Inverter                            ABB or BOSCH-REXROTH
•    Quantitive feeding motor:         0.75 kW (AC motor )
•    Capacity Max:                    ≈250 kg/h (PVC material, vary with different                                     recipe and pipe size)
•    Vertical gearbox:                    high torque, low noise, hard gear face                                            special gearbox for extruder;                                                     Material of box: HT200 with tempering;                                         Material of gear: 20GrMnTi with                                                 carburizing ,quenching and grinding
•    Lubrication system:                 circulating oil enforced by oil pump; infiltration                                     and splash in oil basin
•    Barrel heating power:               21.4 kW
•    Barrel cooling power:               3×0.25 kW  enforced air cooling
Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

Features:
      Four strand design can produce four pipes at one time which can increase efficiency greatly.
      Technical parameter
      Die material:                       40Cr, forgings with tempering treatment
      Bolt grade:                         12.9 grade high strength bolt
      Flow channel surface:            chroming and mirror polishing
      Pipe range:                     Ø16~32mm
Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                                        
•    Center height:                1000 mm
•    Tank material:                  stainless steel
•    Tank length:                   4000 mm
•    Vacuum degree:                0~0.06MPa (adjustable)
•    Vacuum pump:                 2.2 kW  
•    Water pump:                   3.0 kW
•    Moving motor:                  0.75 kW
•    Cooling method:                immersion
•    Adjust range of forward and backward:           ±400 mm
•    Adjust range of up and down:                  ±50 mm
•    Adjust range of left and right:                    ±50 mm


Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
           Technical parameter                                   
•    Quantity of belts:                  8pcs
•    Effective length:               1000 mm
•    Max. Hauling force:             6000 N.m
•    Hauling speed:                 1-10 m/min
•    Clamping type:                 pneumatic 
•    Hauling motor:                  4×0.55 kW 
•    Control method:                ABB or BOSCH-REXROTH
           For cutting part
           Technical parameter                                     
•    Cutting type:                    knife cutting
•    Clamping type:                   pneumatic
•    Workbench moving method:         pneumatic
•    Cutting range:                   Ø16~32mm
•    Cutting motor:                       4×0.25 kW
•    Control method:                    Siemens PLC controller 

Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

•    Motor power:                4kW
•    Feeding port size:            240× 350mm
•    Rotor diameter:                Ø200mm
•    Rotating speed:                650rpm
•    Rotating blades:                3pcs
•    Fixed blades:                2pcs
•    Blade material:                Cr12MoV
•    Protection:                    overload emergency stop
•    Crushed material size:         <=8mm
•    Capacity:                    50-100kg/h
Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line


Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

we can show you machine running anytime. Welcome to our factory for visiting. 
Besides, i can send some machine running vidoes for your reference.
Four strands PVC pipe machine four strand PVC pipe extrusion line
This four strands PVC pipe machine four strand PVC pipe extrusion line can produce the pipe size 32mm. this four strands PVC pipe machine four strand PVC pipe extrusion line is with big capacity, it is 4 production lines, can produce 4 pipes at same time. So the capacity is high. The pipe size is: 16-32mm diameter.
please check below machine pictures for your reference:
Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

Material :                           PVC (polyvinyl chloride)
Pipe size range:                     Ø16~32mm
Operating direction:                 from right to left
Center height:                       1000 mm
Machine color:                      Xinrong standard color (white)
Cooling water consumption:           8 m3/h  ( ≤20ºC,≥0.3MPa )    
Tank volume:                     12 m3 
Compressed air consumption:      0.5 m3/min ( >0.5MPa )
Total power:                         165kW
Actual power when operating:        100kW
Overall dimension:                   31000×3000×3000 mm
Control system:                   RKC temperature controller, Japan 
DC speed regulator:                Eurotherm, U.K 
Inverter:                     ABB or BOSCH-REXROTH
Low voltage electrical parts     
Button, switch                 Schneider, France 
Contactor                    Schneider, France
Air switch                     Schneider, France 
Intermediate relay             Schneider, France
Temperature controller          RKC, Japan
Heater                        magal alloy ceramic heater
l    Circumstance: 
Working place:               indoors
Power supply:                no dangerous area
Temperature:                 0-40ºC
Humidity:                    85% no condensation

Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line


Vaulted cover, no distortion. National patent for principal axis airproof device. 
Self-friction or electric heating and steam heating function of the hot mixing.
•    Total capacity:                     200/500 L
•    Effective capacity:                  150/320 L
•    Vane rotation speed:                475/950/130 rpm
•    Motor heating power:                30/42/11 KW
•    Water consumption:                 4 t/h
•    Heating method:                    self-friction or electric heating
•    Discharge method:                  pneumatic or manual
•    Dimension (L×W×H):                3000×1500×2000 mm
•    Mixing time:                        10-12 min/pot
•    Cooling time:                       10-12 min/pot

Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

•    Screw, barrel:                    38CrMoAlA, nitriding and polishing,                                             depth of nitriding: 0.45-0.65mm,                                                 surface hardness HV800-900;                                                 with vacuum exhaust device,                                                    vacuum exhausting power: 2.2 kW
•    Sensor:                         PT131B, 50MPa; power 24V, output 0-10V 
•    Screw diameter:                 65/132 mm
•    Screw rotation direction:           different direction outwardly
•    Drive motor power:                  37 kW, AC motor
•    Inverter                            ABB or BOSCH-REXROTH
•    Quantitive feeding motor:         0.75 kW (AC motor )
•    Capacity Max:                    ≈250 kg/h (PVC material, vary with different                                     recipe and pipe size)
•    Vertical gearbox:                    high torque, low noise, hard gear face                                            special gearbox for extruder;                                                     Material of box: HT200 with tempering;                                         Material of gear: 20GrMnTi with                                                 carburizing ,quenching and grinding
•    Lubrication system:                 circulating oil enforced by oil pump; infiltration                                     and splash in oil basin
•    Barrel heating power:               21.4 kW
•    Barrel cooling power:               3×0.25 kW  enforced air cooling
Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

Features:
      Four strand design can produce four pipes at one time which can increase efficiency greatly.
      Technical parameter
      Die material:                       40Cr, forgings with tempering treatment
      Bolt grade:                         12.9 grade high strength bolt
      Flow channel surface:            chroming and mirror polishing
      Pipe range:                     Ø16~32mm
Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                                        
•    Center height:                1000 mm
•    Tank material:                  stainless steel
•    Tank length:                   4000 mm
•    Vacuum degree:                0~0.06MPa (adjustable)
•    Vacuum pump:                 2.2 kW  
•    Water pump:                   3.0 kW
•    Moving motor:                  0.75 kW
•    Cooling method:                immersion
•    Adjust range of forward and backward:           ±400 mm
•    Adjust range of up and down:                  ±50 mm
•    Adjust range of left and right:                    ±50 mm


Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
           Technical parameter                                   
•    Quantity of belts:                  8pcs
•    Effective length:               1000 mm
•    Max. Hauling force:             6000 N.m
•    Hauling speed:                 1-10 m/min
•    Clamping type:                 pneumatic 
•    Hauling motor:                  4×0.55 kW 
•    Control method:                ABB or BOSCH-REXROTH
           For cutting part
           Technical parameter                                     
•    Cutting type:                    knife cutting
•    Clamping type:                   pneumatic
•    Workbench moving method:         pneumatic
•    Cutting range:                   Ø16~32mm
•    Cutting motor:                       4×0.25 kW
•    Control method:                    Siemens PLC controller 

Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

•    Motor power:                4kW
•    Feeding port size:            240× 350mm
•    Rotor diameter:                Ø200mm
•    Rotating speed:                650rpm
•    Rotating blades:                3pcs
•    Fixed blades:                2pcs
•    Blade material:                Cr12MoV
•    Protection:                    overload emergency stop
•    Crushed material size:         <=8mm
•    Capacity:                    50-100kg/h
Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line


Four Strands PVC Pipe Machine Four Strand PVC Pipe Extrusion Line

we can show you machine running anytime. Welcome to our factory for visiting. 
Besides, i can send some machine running vidoes for your reference.

Automobile sunshade is the major benefits from the sun, which light can not enter into the car, reducing the car hot effect to a certain extent, and avoid the leather seat and dashboard by UV damage, in addition to increase privacy features, the vehicle outside see inside not clear, can increase safety factors, these effects are reflected in the parking situation. It is convenient and cheap to shield the sun from the car.

Side Window Car Sunshade

Side Window Car Sunshade,Windshield Shade,Car Side Window Shades

Ninghai Chunye Car Accessories Co.,ltd. , http://www.chunyeauto.com

Posted on