Tibet solar heating technology research succeeded

The solar heating technology jointly researched by the Energy Demonstration Center of the Tibet Autonomous Region and the Energy Research Institute of the Chinese Academy of Sciences has been successful in Tibet recently. The successful research of this project will play a certain role in alleviating the energy shortage in Tibet.
The deputy director of the Science and Technology Department of the Tibet Autonomous Region, Mr. Jiacuo, said that solar heating technology is a key scientific research project of Tibet during the Tenth Five-Year Plan. It is a low-cost, high-efficiency, high-energy-saving technology that uses solar energy for heating and heating. Heating and summer water supply. In addition, solar hot water heating, the indoor air temperature rises when exhausting, is very suitable for the cold and dry climate of the plateau.

Solar heating technology has been tested in some areas of Tibet, and the effect is good. The relevant departments of the autonomous region are embarking on the promotion of this technology to all units and families in the region.

The background and signification of research this program

As plastic has been used for all other industry widely, they are playing an important role in the development of our economy, but plastic did not easy to broken after being used and it becomes a big pollution for our environment .Therefore it is urgent to process those waste material without pollution.

In addition ,as the fastest development of world economy ,the shortage of petroleum will be urgent more and more .even the expert had stated that it will have no petroleum recover in earth after 15 years later, so searching the new resource becomes an issue which is concerned by all the countries of the world.

so it have great meaning of settle this program ,which can recycled waste material like plastic into resources without any pollution.

1.Working process Of waste plastic Pyrolysis Plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460 C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

2. Model of waste plastic Pyrolysis plant:

Model	Reactor size	Material	Handling capacity	Weight	Seaworthy packing
LJ-8	*22006000mm**	Q245R boiler steel plate	5 tons	24tons	*240HQ**
LJ-9	*22006600mm**	Q245R boiler steel plate	8tons	26tons	*240HQ**
LJ-10	*26006600mm**	Q245R boiler steel plate	10tons	30tons	*140FR+140HQ*

3. Plastic Oil output reference: 20%~75%

4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the waste plastic pyrolysis plant,and buyer will be in charge of the food, accommodation and round air tickets.

5. Land requirement: 300sq meters(10m*30m)

6. Exporting Experience:

America:	Brazil, Canada, Colombia, USA,
Middle East:	Dubai, Iran, Jordan, Saudi Arabia, Turkey
Europe:	Albania , Bosnia and Herzegovina
Asia:	Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar
Africa:	Ghana, Mozambique, Zambia

Waste Plastic Pyrolysis Plant

Waste Plastic Pyrolysis Plant,Full Automatic Waste Plastic Pyrolysis Plant,Oil Distillation Plant,Rubber Refining To Oil Plant

Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com