ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange

Model NO.: slip on flange BTF-FL-043
Manufacturing Way: Forging
Name: P250gh Carbon Steel Slip on Flange
Shipment Term: by Sea or by Air
Surface: Rust Oil or Painting
Pressure: 150lbs-2500lbs
Quality Control: TUV SGS
Quality Certificate: Material Test Report Dimension Report
Certificate: Forma Forme Co
Carbon Steel Flange: A105 A105n Q235 St37.2 16mn 20mn 20# Steel C22.8
Stainless Steel Flange: SS316 SS316L SS304 SS304L
Alloy Steel Flange: 16mo3 13crmo4-5 15CrMo P250gh
Trademark: BTF or as request
Transport Package: Ply Wooden Cases or Pallet
Specification: 1/2"-80"
Origin: China
HS Code: 73079100
Model NO.: slip on flange BTF-FL-043
Manufacturing Way: Forging
Name: P250gh Carbon Steel Slip on Flange
Shipment Term: by Sea or by Air
Surface: Rust Oil or Painting
Pressure: 150lbs-2500lbs
Quality Control: TUV SGS
Quality Certificate: Material Test Report Dimension Report
Certificate: Forma Forme Co
Carbon Steel Flange: A105 A105n Q235 St37.2 16mn 20mn 20# Steel C22.8
Stainless Steel Flange: SS316 SS316L SS304 SS304L
Alloy Steel Flange: 16mo3 13crmo4-5 15CrMo P250gh
Trademark: BTF or as request
Transport Package: Ply Wooden Cases or Pallet
Specification: 1/2"-80"
Origin: China
HS Code: 73079100
ASTM ANSI B16.5 forging raised face RF A105 A105n Q235 P250GH carbon steel slip on flange
Threaded flange
Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe. This type of joint connection is Speedy and simple but not suitable for high presser and temperature applications. Threaded Flanges are mostly used in utility services such as air and water.
Blind Flanges
The blind flange is a blank disc with bolt hole. These types of flanges are used with another type of flange to isolate the piping system or to terminate the piping as an end. Blind flanges are also used as a manhole cover in the vessel.
Slip on flanges 
Slip-On flange has a hole with matching outside diameter of pipe from which pipe can pass. The flange is placed on pipe and fillet welded from both inside and outside. Slip-On Flange is suitable for low pressure and temperature application. This type of flange is available in large size also to connect big bore piping with storage tank nozzles. Normally, these flanges are of forged construction and are provided with the hub. Sometimes, these flanges are fabricated from plates and are not provided with the hub.
Weld neck flange
Weld neck flange are most widely used flanged in process piping. It gives the highest level of joint integrity due to Butt-welded with a pipe. These types of flanges are used in high pressure and temperature application. Weld neck flanges are Bulky & costly with respect to other types of flange.
 

Production instructions
We can produce Amercian Standard, German Standard, Italian Standard, European Standard, Chinese Standard flanges, also offer all kinds of non-standard flanges according to you drawings, diameter ranging from DN15 to DN3000, press rate up to 2500LBS. Flanges are made of carbon steel, stainless steel, alloy steel, duplex ferric-austenitic steel.


Flange Standard
American Standard ASME B16.5,ASME B16.47,ANSI B16.5,API605,AWWA C207
Japanese Standard JIS / KS 5K / 10K / 16K / 20K / 30K
German Standard DIN2527,2528,2561,2565,2566,2573,2576,2627-2638,2641,2642,2655,2656,2673,86029
British Standard BS4504 PN16 / 25 / 40,BS10 TABLE E / TABLE D
Italian Standard UNI 2253,2254,2276,2278,2281,6084-6093
China Standard GB/T 13402-92,GB/T9112-9124-2000,HG5010-5028
Flange Material 
Carbon steel :
ASTM A105, ASTM A350 LF1,LF2,S235JR,P245GH,C22.8,P250GH,P280GH,16MN,20#steel.
Stainless steel :
ASTM A182 F304/304L,F316/316L.
Alloy steel :
ASTM A182 F11,F12,16Mo3,13CrMo4-5,15CrMo,1.7335.
Inspection 
factory inspection in workshop , the third party inspection SGS,3.1 certificate , MTC etc.
Production Process

ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange
Equipment Exhibition

ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange
Product Show

ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange
ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange

Quality Assurance-TUV Certificate
ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange


Quality System Certificate:
We have Grade A Manufacture License of Special Equipment , Press Equipment Directive Quality-Assurance System Certificate , China Classification Society Certificate of Work Approval, TUV Certificate
Perfect Inspection Process:
Raw material inspection(5steps)- Raw materials testing is to ensure the raw material conforming to the order requirements.
Process testing(10steps)-Each processing step testing is to guarantee each step product qualified.
Factory testing(6steps)-Assure 100% product qualified rate to meet customer's requirements
Contact Us

ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange
All products can be customerized designed . We will supply professional service within 24 hours .Welcome to contact Sales Director Cathy Liu .
 
 
ASTM ANSI B16.5 forging raised face RF A105 A105n Q235 P250GH carbon steel slip on flange
Threaded flange
Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe. This type of joint connection is Speedy and simple but not suitable for high presser and temperature applications. Threaded Flanges are mostly used in utility services such as air and water.
Blind Flanges
The blind flange is a blank disc with bolt hole. These types of flanges are used with another type of flange to isolate the piping system or to terminate the piping as an end. Blind flanges are also used as a manhole cover in the vessel.
Slip on flanges 
Slip-On flange has a hole with matching outside diameter of pipe from which pipe can pass. The flange is placed on pipe and fillet welded from both inside and outside. Slip-On Flange is suitable for low pressure and temperature application. This type of flange is available in large size also to connect big bore piping with storage tank nozzles. Normally, these flanges are of forged construction and are provided with the hub. Sometimes, these flanges are fabricated from plates and are not provided with the hub.
Weld neck flange
Weld neck flange are most widely used flanged in process piping. It gives the highest level of joint integrity due to Butt-welded with a pipe. These types of flanges are used in high pressure and temperature application. Weld neck flanges are Bulky & costly with respect to other types of flange.
 

Production instructions
We can produce Amercian Standard, German Standard, Italian Standard, European Standard, Chinese Standard flanges, also offer all kinds of non-standard flanges according to you drawings, diameter ranging from DN15 to DN3000, press rate up to 2500LBS. Flanges are made of carbon steel, stainless steel, alloy steel, duplex ferric-austenitic steel.


Flange Standard
American Standard ASME B16.5,ASME B16.47,ANSI B16.5,API605,AWWA C207
Japanese Standard JIS / KS 5K / 10K / 16K / 20K / 30K
German Standard DIN2527,2528,2561,2565,2566,2573,2576,2627-2638,2641,2642,2655,2656,2673,86029
British Standard BS4504 PN16 / 25 / 40,BS10 TABLE E / TABLE D
Italian Standard UNI 2253,2254,2276,2278,2281,6084-6093
China Standard GB/T 13402-92,GB/T9112-9124-2000,HG5010-5028
Flange Material 
Carbon steel :
ASTM A105, ASTM A350 LF1,LF2,S235JR,P245GH,C22.8,P250GH,P280GH,16MN,20#steel.
Stainless steel :
ASTM A182 F304/304L,F316/316L.
Alloy steel :
ASTM A182 F11,F12,16Mo3,13CrMo4-5,15CrMo,1.7335.
Inspection 
factory inspection in workshop , the third party inspection SGS,3.1 certificate , MTC etc.
Production Process

ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange
Equipment Exhibition

ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange
Product Show

ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange
ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange

Quality Assurance-TUV Certificate
ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange


Quality System Certificate:
We have Grade A Manufacture License of Special Equipment , Press Equipment Directive Quality-Assurance System Certificate , China Classification Society Certificate of Work Approval, TUV Certificate
Perfect Inspection Process:
Raw material inspection(5steps)- Raw materials testing is to ensure the raw material conforming to the order requirements.
Process testing(10steps)-Each processing step testing is to guarantee each step product qualified.
Factory testing(6steps)-Assure 100% product qualified rate to meet customer's requirements
Contact Us

ASTM ANSI B16.5 Forging Raised Face RF A105 A105n Q235 P250gh Carbon Steel Slip on Flange
All products can be customerized designed . We will supply professional service within 24 hours .Welcome to contact Sales Director Cathy Liu .
 
 

PTA Powder

Main application:Repair and strengthen workpiece surface, significantly

Welding method:PTA welding

Main equipment:PTA welding machine

Flame core temperature: about 10000℃

Technological characteristics:PTA has high temperature, concentrated energy, stable combustion, small heat affected zone, fast welding speed, high production efficiency, easy to obtain low dilution rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical bonding,, bonding strength is high.

Gpni0105b X100

PTA welding technology is one of surface strengthening methods, which has high deposition rate, low dilution rate, and could be applied with many kinds of powder. The manufacturing craft of PTA powder is normally gas atomization, which reduces satellite of powder. We supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based alloy powder, Cobalt-based alloy powder and Mixed Powder.

Nickel Based Alloy Powder possesses high temperature resistance and wear resistance, it is the most popular alloy powder applied by PTA welding both domestically and internationally. Coating hardness is within the range of HRC 30-60. It could be applied to various industries like agriculture, plastic, paper, marine and steel making where wear and corrosion protection needed. Some examples are plunger, moulds, pump leaf and screw.

Iron Based Alloy Powder is more widely used and a more economic choice. With high abrasive resistance, it is more commonly applied to mining tools, drilling tools and mixers of iron and steel making industry, coal industry, shaft, oil and energy industry.

Cobalt Based Alloy Powder is recommended for corrosion and oxidation resistance, with better hot hardness values than equivalent Nickel based alloy powder. It is widely applied to steel making industry, coal industry and mining industry.

Mixed powder mainly refers to NiCrBSi mixing with other hard-phase powder such as cast tungsten carbide and other cemented alloy powder, which allows the powder better hardness around HRC60 and excellent abrasion resistance.

Mixed powder is more often used for mining equipment for oil sands, lignite, oil drilling tools, excavator buckets, extrusion screws for plastic processing, grain and oil processing, etc.

PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvof.com

Posted on