Elevator monitoring installation network bridge installation precautions

The elevator is a complex closed environment, and the mature wireless monitoring has become the primary choice for elevator monitoring applications. The wireless bridge is the transmission equipment in wireless monitoring, which is easy to install and low in cost. But in the actual elevator monitoring installation process, there will be many problems, this is just one of the points, let's learn together.

One: Enter blindly?

Elevators are special equipment and have a certain degree of danger. Do not enter the site blindly.

1. Before installation, we need to go to the property to understand the wiring of the elevator and monitoring on site.

2. Contact the elevator maintenance personnel first. External personnel must be led by the elevator maintenance personnel before entering the site (elevator operators are required to hold a special operation certificate issued by the State Administration of Work Safety before they can work).

Two: How to solve the problem of bridge power supply?

Different elevator brands have different structures, and the configurations of the top and bottom of the car are also different. The power supply of the elevator car top of the renovation project is very likely to be occupied by the camera. Where does the bridge get power from? During the survey, pay attention to whether the top of the car is a power strip. If there is no power strip, you need to prepare another power strip to get electricity.

Three: Where is the bridge installed?

Choose the location of the bridge installation point to avoid obstructions as much as possible, especially metal materials will affect the signal. The net bridge on the top of the elevator car can be installed on the top railing; the other one is installed in the foundation pit? It is possible that water will accumulate in the foundation pit, which will affect the signal transmission of the bridge, so fixing it on the wall of the elevator shaft is an ideal method.

Four: What is the fixed bridge?

How to fix the bridge at the top or bottom of the elevator shaft? When the bridge leaves the factory, most of the manufacturer’s accessories only contain hoops or cable ties, and there is no bracket, so don’t forget to buy a bracket! The hoops and ties should be held tightly when securing the bridge.

Five: How to set up the bridge?

Most bridge configuration methods on the market:

â‘ Web interface configuration: first enter the web interface of the two bridges to set the IP address, then set the transmitter, receiver, and finally set the channel.

â‘¡Dial-code bridge: The dial-code keys on the bridge, some of which represent the working mode code, group pairing code, and IP address code. This requires the manual to study clearly to complete the pairing well.

â‘¢Digital display bridge: The set information is displayed visually on the bridge, but it still needs to manually set the IP address and channel on the bridge first, and then press and hold the dial button of the bridge at the same time to make the pairing successful.

As an important wireless monitoring transmission equipment, the performance and correct use of the wireless bridge are related to the normal operation of the entire wireless monitoring system.