Henan Luyang infant school bus collided with trucks



At about 30:30 in the afternoon on November 29th, a license plate for the small Harvard kindergarten in Bagongqiao Town, Qiyang County was a Yujia J57022 Jinbei van, and a traffic accident occurred on the 106 national road due to the wet and slippery weather and a truck collision. There are several students on the school bus and rescue workers are rushing to the scene.

It was verified that there were 15 kindergarten students and 1 guardian teacher on the Jinbei van, 4 were seriously injured and 6 were minor injuries. The staff in charge of propaganda at Fuyang Fire Department told the reporter that the accident site was located near Beijin Zhaicun, Bagongqiao Town, Liyang County, 106 State Road. The school bus is a Kindergarten gold van with 7 children in the car. The Golden Cup van has been crashed and rescue workers are rushing to the incident.

As of now, all injured people are actively and properly treated. The driver has been controlled by the public security department and the cause of the accident is under further investigation.

Spherical Plain Bearing

The so-called aligning bearing is that the raceway raceway is spherical, and it can adapt to the angular displacement between the two raceways, which is mainly supported by radial load, and can also bear a small number of two-way axial loads.
Characteristics of core bearing
It is mainly subjected to radial load, and it can also bear a small amount of bidirectional axial load.

diaoxin1

Tune ball bearing editing
The center ball bearing is the inner ring of the two raceways and the outer ring of the raceway for the spherical surface, and the ball bearing is assembled with a ball shaped roller. It can bear a large radial load and also bear a certain axial load, as shown in Figure 1. The outer raceway of this kind of bearing is spherical, so it has the performance of adjusting center.
The main features of the ball bearing are as follows:
(1) the outer race raceway of the ball aligning ball bearing is a part of the sphere. The center of curvature is on the bearing axis. Therefore, the bearing has the function of adjusting the center, and it can be automatically adjusted when the shaft and shell appear flexure, and does not increase the bearing burden.
(2) an appropriate amount of axial load that can bear radial load and two directions. But it can't bear the torque load.
This kind of bearing has smaller contact angle, almost no contact angle under axial load, small axial load capacity, large radial load capacity, and suitable for heavy load and impact load.
(3) the double row center ball bearing with tightened and locking nuts can be installed at any position on the optical axis and does not need to be positioned on the shoulder.
diaoxinqiu1

Spherical Roller Bearings
Spherical Roller Bearing is in the two groove of the inner ring and outer ring raceways between Spherical Bearing assembly, a drum shaped roller, as shown in figure 3. Spherical roller bearing with two rollers, mainly bear radial load, also can withstand any direction of the amount of axial load; radial load capacity is very high, especially suitable for radial heavy loads or vibration, but unable to bear pure axial load.
The main characteristics of the spherical roller bearing:
(1) bearing with self-aligning ball like outer ring spherical roller bearing raceway is a part of spherical surface, the curvature center on the bearing axis, the bearing outer ring raceway is spherical shape, so its self-aligning performance is good, can compensate concentricity error, thus can realize the automatic aligning.
(2) in the section perpendicular to the rolling direction, the roller busbar is a curve, which fits well with the inside and outside raceway. The roller and raceway are linear contacts, which can bear radial load and axial load, and has good impact resistance.
(3) roller and roller bearing raceway match well, and are therefore relatively serious curve generatrix, sliding, friction than cylindrical roller bearings, spherical roller bearings are allowed so low working speed.
(4) the heart fades with a normal roller bearing non symmetrical roller, it will generate an axial force, roller by the force and the center fixed flange contact, spherical roller bearing symmetrical roller, it can move along the axial direction using the middle movable baffle ring, so no longer block roller center the edge of the constraints, and saves the recess of the inner raceway, the roller can be used longer, so as to improve the bearing capacity.
(5) single row self-aligning roller bearing contact angle is 0. Under axial load, the contact angle did not change significantly, the axial load will be very small contact forces generated great between roller and raceway, so when the axial load is greater than the radial load, the loads of single row spherical roller bearing can bear radial and axial.
(6) bearing with self-aligning ball like set with tight double row spherical roller bearing can be installed in any position on the optical axis, do not need to process the positioning shaft shoulder.
diaoxinguanzi1

Spherical Plain Bearing,Cheap Spherical Plain Bearing,High Precision Spherical Plain Bearing,Radial Spherical Plain Bearings

LUOYANG AUTO BEARING CO.,LTD , https://www.ballbearing.nl

Posted on