Second-hand car sales increase faster than new car sales

Second-hand car sales increase faster than new car sales The relevant person in charge of the Ministry of Commerce stated on July 11 that since 2011, China's auto market has begun to transition from high-speed growth to steady growth, and the role of used-car circulation in expanding auto recycling will become increasingly prominent. At the end of 2012, China’s vehicle ownership exceeded 120 million vehicles, an increase of 63.92 million vehicles compared to the end of 2007, and the status of end-of-life vehicle recycling and dismantling in the automotive industry and the development of circular economy will be even more important.

Data show that in 2012, the used-car trade volume was 359.5 billion yuan, an increase of 22.6% year-on-year, and the transaction volume was 7.94 million, an increase of 16.4% year-on-year. The growth rate was 12.1 percentage points higher than the sales of new cars, which was equivalent to 41% of new car sales. With the acceleration of automobile replacement, the recycling and dismantling industry of end-of-life vehicles has also steadily increased. At the end of 2012, there were 522 waste recycling and dismantling enterprises in the country. In 2012, total sales amounted to 7.85 billion yuan, and 1.15 million scrapped motor vehicles were recycled, a year-on-year increase of 0.5%.

According to the person in charge of the Department of Market System Construction of the Ministry of Commerce, in order to regulate the use of used cars, the Ministry of Commerce, together with relevant departments, has successively introduced policies such as the Measures for the Administration of Second-hand Car Circulation and the Regulations for the Use of Used Cars, effectively guiding the healthy development of the industry. In the next step, aiming at the issue of transparent use of used car market information that consumers are most concerned about, relevant sources of the China Automobile Dealers Association disclosed that the association has drafted the “Second-hand Car Appraisal and Evaluation Technical Specification”, which has been submitted to the National Standards Committee for review.

    The automotive industry is a wide range of companies and organizations involved in the design, development, manufacturing, marketing, and selling of motor vehicles, some of them are called automakers. It is one of the world's most important economic sectors by revenue. The automotive industry does not include industries dedicated to the maintenance of automobiles following delivery to the end-user, such as automobile repair shops and motor fuel filling stations. Around the world, there were about 806 million cars and light trucks on the road in 2007, consuming over 980 billion liters (980,000,000 m3) of gasoline and diesel fuel yearly.[ The automobile is a primary mode of transportation for many developed economies.

    The density of aluminum is only one third of that of iron and steel, but its thermal conductivity is more than three times higher than that of iron. Most notably, the structural design optimization of Al substitute Steel can achieve significant weight loss for Auto industry, and the effect can be directly reduced by 50 to 100 percent. Cars use 1 kg aluminum instead of 2.25 kg steel, which can reduce exhaust gas emissions by 20 kg. it can be seen that aluminum alloys have high strength, recyclability and corrosion resistance. Low density and other high quality properties have become the first choice material for automobile weight loss. XINYU MOULD have dedicated ourselves into Auto alum. Die casting industry over past years by designing and building alum. HPDC dies for AUTO OEMs which have the demand of light metal parts for weight reduction (Structural Parts) as well as parts for Automotive Powertrain Oil Pan ,Redirector, A/C Compressor are in our competence area, irrespective of sophistication or size, XINYU is able to offer unparalleled die/mould solution with competitive cost but without quality compromise, warmly welcome paying the trip to XINYU MOULD


AUTOMOBILE DIE

Fig. Automobile Component die


Auto die


Fig. Automobile Component die



Xinyu Mould Capabilities

  • Xinyu Mould At Glance

1.Year Of Establishment:2002

2.Location:2 (One Is Brand New)

3.Land Area:3600sqm

4.Emplyees:120

5. Equipment;CNC:18 (Makino, Toshiba, Liyang ), WEDM:10, EDM:9, Spotting Machine:2, CMM:2, Gun Drill Machine:2, Die Casting Machine:7, Others:50


  • Xinyu Mould Technical Profile

1. Engineers In 2d&3d: 16

2. Engineers In Cnc Programming:6

3.File Format For 2d: Dwg&Dxf

4.File Format For 3d:Iges&Step

5.Software For 2d:CAD

6.Software For 3d:Simens NX & Pro-E 

7.Software For Programming: Powermill

8.Software For Mould Flow: Magma 


  • Xinyu Mould Process Control

1.MES Process Control System

2.IATF 16949 Quality System

3.Well-Trained Operators

4.CMM Inspection 


  • Xinyu Mould Advantages

1. CAE Support Magma(Lid 18175001)

2.Rich Experience In Casting Dies For Auto Structual Parts,Powertrain;Oil Pan;Redirector; AC Compressor

3.Trial Run Machines Available In House From 160t To 1600t

4.Vaccum Venting System Application In Dies

5. Partial Squeeze Skill In Dies

6.High Precision Imported CNC(5 Axis)

7.Globalized Hr Concept 

  • Xinyu Mould Die Capacity

1.Max Die Size:2500*2500*1800

2.Max Die Tonnage:2500t

3.Biggest Die Casting Machine:1600t

4.Most Complex Die: 11slides

5.Yearly Capacity:350sets 


  • Xinyu Mould Marketing

1.Main Market:Na;Europe;Asia

2.Main Field: Auto;Telecommunication;

Lighting;General Machinery;Power Tool

Furniture

3.Partner Offering After Sales Service:

Available In India&Us,Europe

4.Business Involved:

Aluminum Die Casting Dies

Aluminum Die Casting Components 


  • Xinyu Mould Commercial Terms&Conditions

1. Fob Ningbo/Shanghai

2.Payment Term:Tt

3.For Dies:50% Down Payment 50% Prior To Delivery

4. For Castings: 10% Down Payment

The Rest Within 30days After b/l Date

5.Leadtime For Quotation:2days

6.Feedback For Customers' Query:24hours



Automobile Motorcycle Die Casting Die

Automobile Die Casting Die,Motorcycle Die Casting Die,Automobile Engine Flywheel Die,Automotive Oil Pump Casing Die

Ningbo Beilun XinYu Mould Manufacturing Co.Ltd. , http://www.xinyudiecasting.com

Posted on