Development Status and Features of Drying Equipment for Calcium Carbonate Industry

The overall requirements are high thermal efficiency, low energy consumption, simple configuration, convenient control, small footprint, and safe and hygienic operation environment. At present, the commonly used drying equipment in the inorganic salt industry are: rotary tube dryers, rotary indirect heating dryers, disc continuous dryers, and air dryers (also divided into pulse air flow, air flow rotation, positive and negative pressure secondary air flow drying ), Rotary Flash Dryer, Rotary Drum Dryer, Spray Dryer (also divided into Granulator, Powder, Centrifugal, Pressure Type), Vibrating Fluidized Bed Dryer, Static Vacuum Dryer, Hot Air Circulating Dryer, Oven Type , Paddle-type vacuum dryer, boiling dryer (horizontal, vertical) and so on.

These drying equipments provide guarantees for product quality. However, there are problems with tail gas collection. Due to the increasing number of nano-scale products, the original particle size is becoming finer and the potential moisture content of the paste-like material is increased. In addition, as companies continue to develop toward large-scale and large-scale production, companies are eager to combine drying equipment. In particular, some large tonnage products, such as precipitated calcium carbonate, currently produce more than 3 million tons nationwide, the smallest production line has an annual output of 10,000 tons, and 100,000 tons needs five sets of drying equipment. A company in Guangxi plans to obtain 500,000 tons, According to the current level of drying equipment, the amount of “dust” collected from the tail gas after drying is irrespective of the footprint of the equipment.

According to the pulse bag filter commonly used in the industry, the operating environment is very bad and must be taken to solve it. Therefore, we hope that the equipment development unit will focus on solving two problems. One is the problem of drying of paste-like fine objects with high moisture content, and the other is that the exhaust gas after the object is dried will receive “dust” industrial hygiene problems. The calcium carbonate industry is still used as an example. For more than 200 companies across the country, in the selection of drying equipment, basic rotary indirect heating dryers, disc-type continuous dryers, rotary column dryers, etc. are used. Although the production efficiency is met, energy consumption is met. Both the dust and the tail gas were not ideal. Once a calcium carbonate enterprise had a white layer of calcium carbonate powder on the ground and roof, it was even white on the desks and chairs in the office. This aspect had management problems. What's more important is that the tail gas after drying is not close to "dust." Recently, this industry introduced DuPont's dust removal equipment and basically solved the problem.

Therefore, the combined drying equipment should include: heat source equipment, primary and secondary drying equipment, and tail gas collection “dust” equipment. I hope the equipment manufacturers and research institutes will make a fuss about high thermal efficiency, low energy consumption, simple configuration, and easy control. , Make a fuss about the combination drying equipment, serve others, develop yourself. If the calcium carbonate industry solves the problem of drying and achieves high efficiency and environmental friendliness, other types of drying problems will be solved.

Cell Rubber Fender here mentioned is improved over the ordinary type. It has high absorption energy per unit weight and low tilt compression performance change among all types of compressed fenders. In the front it is equipped with frontal frame which greatly reduce the face pressure on ship panel and the friction coefficient.

1, lease impact strength, high absorption of energy

2, easy to be installed and maintenance due to simple shape

3, It can be widely used and it will be suitble to any size of the ship or wharf.

4, It can be absorbed most of the impact energy of pitching and rolling when ship alongside.

5, Low reaction force and high capability of energy absorption;

6, Due to its structure, the product has the characteristic of higher force absorption, and has long usage life.

7, Little influence on it when ships touch the dock from the bevel angle, so especially applicable for large ships and sea docks.

Cell Fender

Cell Fender, Super Cell Fender, Cell Marine Fender, Cell Rubber Fender

Qingdao LuHang Marine Airbag and Fender Co., Ltd. , http://www.marinefendersystem.com

Posted on