![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
A new 800m3/h circulating cooling water system will be built in the West District to supply the users of the West Air Compressor and the original production users in the West District. The original circulating cooling water system of the Steel Pipe Branch will continue to be used by the production users in the Eastern District. Moreover, it also supplied the users of the air compressor station in the Eastern District, and considered a certain margin for the future development of the steel pipe branch. In this way, the new circulating cooling water system in the West District and the original circulating cooling water system in the Eastern District can operate independently. Compared with the scheme of adding a circulating cooling water system in each of the east and west districts, the rationality is greatly enhanced, which not only brings convenience to the production and management of the users, but also the western district can be discontinued during the annual repair of the steel pipe branch, saving investment. .
The original screw air compressor was dismantled in batches and used the original West Air Compressor Station. In order to ensure the production of gas, the original two 20m3/min screw air compressors were dismantled in two batches. In the first batch, one screw machine and all auxiliary equipment in the station were dismantled, and then two centrifugal air compressors with a displacement of 150 m3/min and a discharge pressure of 0.75 MPa and two refrigerating dryers of 150 m3/min were installed. After the new equipment is operating normally, another screw air compressor is removed.
After the two new sets of newly installed equipment in the West Air Compressor Station were stable, the following modifications were made to the Eastern Air Compressor Station: the original East Air Compressor Station was used to dismantle the original 6 units in two batches in order to ensure production gas. The old air compressor and auxiliary equipment were installed in two batches with five centrifugal air compressors with a displacement of 100m3/min and an exhaust pressure of 0.75MPa and five refrigerating dryers with a flow rate of 100m3/min. The specific transformation steps are as follows: Using the 1998 annual repair opportunity, the relevant compressed air and cooling water pipelines will be reconstructed, and the interface design of the compressed air pipeline and the cooling water pipeline will be completed to facilitate the installation and smooth connection of the new equipment and new pipelines. .
Vermiculite Tile Roll Forming Machine
Stone coated sheet is formed by 0.4mm Al-Zn plating panel and color stones
It is modern,environmental and nice appearance.
We developed this stone coated production line based on long time running and improvement It is high-performance,stable
energy-efficient and easy operation
TECHNICAL SPECIFICATION
5 tons hydraulic un-coiler:
Hydraulic motor drives. One single-head structure. It has a pressing arm to prevent the coil loose.
Electric uncoiling, hydraulic motor tenses the coil inner.
The max. coil inner-diameter is 508mm.
The max. coil outter-diameter is 1200mm.
The max. width of coil is 1250mm.
The max. capacity is 5 tons.
Roll-Forming M/C:
Welded steel structure base, chains transmit, motor drives it. The machine include the filming device .
The roller is designed by Germany software COPRA, and has FEA analysis, which can promise the product precision.
About12 stations to form; Material of Roller: 45#, with hard chrome coated, polishing,
Voltage:380V/50Hz; Line speed: about 3.5 m/min
Hydraulic pressing/ Cutting:
Stop to press, Stop to cut, Post cut .Cutting tool material: Cr12, pressing tool material:40Cr.
Tolerance of the cutting length ±2mm.
Product Rack
It is 2 parts, 6 meters total.
Un-powered.
Hydraulic System:
It offers power for the cutter.
Electrical System:
It uses Siemens PLC system to control the whole line. It can measure and cut the length automatically. Frequency adjusts the speed and it has the self-control speed function.
Human-machine screen, touch screen control. The length can be set in touch screen freely and operation is simple.
The surround connecting wires adopts aviation socket or fast-speed plug.
Safety barrier system
To protect the workers safely when working.
Vermiculite Tile Roll Forming Machine
Vermiculite Tile Roll Forming Machine,Automatic Profile Rolling Machine,Aluminum Roofing Forming Machine,Stone Coated Tile Making Machine
Botou Xianfa Roll Forming Machine Factory , http://www.rollforming.nl