![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
August is the harvest season. However, for employees of Foton Motor, they not only harvested the fruits of hard work - they achieved the best operating results of the domestic commercial vehicle industry in the first half of the year, and at the same time planted new hopes to seize new energy [ New Energy The topic of the automobile ] market lays the foundation.
New energy vehicle design and engineering center completed Futian's R&D capability to a new level On August 28, Beijing New Energy Automobile Design and Engineering Center was announced at the headquarters of Foton Motors. This was Foton Motor's first phase of operation in January 2007. After the project, the second phase of the groundbreaking research institute began in October 2008. The center occupies an area of ​​approximately 25,000 square meters, with a total investment of more than 144 million yuan.
According to the planning of Foton Motor, the New Energy Vehicle Design and Engineering Center will be mainly used for the design and research and development of new energy vehicles. The purpose is to further integrate the existing research and development resources of Foton Automobile in the new energy field, and give full play to the development of new energy vehicles by Foton Motors. Its advantages include attracting single technology and integrating vehicle R&D platform to achieve integrated innovation, further stimulating upstream and downstream industrial chains, and attracting new partners to participate in the existing R&D system of production, education, and research.
At the same time, through the development of hardware research and development, and as a platform to further integrate the power of all sectors of society, we have opened up the value chain of scientific and technological innovation from basic research, application development, system integration, technology transformation and industrialization, targeting new energy vehicle vehicles. The key technologies for the integration of power systems are being studied to lay the foundation for the further development of new energy vehicles with independent intellectual property rights. Foton Motor also hopes to use this center to continue to attract domestic and foreign industrial technology talents to join Futian, and to strengthen the research and development strength of Foton Motor in the field of new energy vehicles.
Zhao Jingguang, Secretary-General of Beijing New Energy Automobile Industry Alliance, said that the completion of the Beijing New Energy Vehicle Design and Engineering Center will further strengthen the R&D strength of the Beijing New Energy Vehicle Industry Base based on Foton Motor and enhance the attraction of Beijing New Energy Automobile Industry Alliance. force. The completion of the center is also an important step in the development strategy of Foton Auto's new energy vehicles. Futian Motor will continue to focus on the independent R&D of new energy vehicles as the strategic layout of the company.
Opening the concept with tech-inspired ideas The future of automotive design On August 27th, in order to promote the innovation and development of the automotive industry in China and even the world, the technology promoted by Foton Motor and the International Council of Societies of Industrial Design (Icsid) The launching ceremony of the First International Concept Car Design Contest was held in Foton Motor. The competition was co-organized by China Industrial Design Association, Beijing Industrial Design Promotion Center and Italy's Yidi Industrial Design Institute, China Association of Transportation Design Education (CADEA), and Beijing Zero Forward Strategy Consulting Co., Ltd.
The purpose of this competition is to promote the healthy and rapid development of the world's automotive industry. It will serve the purpose of “promoting automotive culture, exploring design talents, enhancing development capabilities, and serving the automotive industry†and providing a platform for numerous industrial designers and art designers to showcase themselves. , Discover and train a group of professionals. At the same time, design masters and experts from all over the world will jointly contribute ideas for car design. Therefore, this competition will be an event that integrates innovation, science and artistry. Its theme is "Technology & the beauty of the future". It is mainly designed for the "future lifestyle." Entries should not only reflect the integration of knowledge, innovation and integration of science and technology, but also demonstrate the future of human-driven demand, and ultimately with advanced technology and future ideas, to create a "people, car, life," the harmonious beauty future.
According to the organizing committee, the design competition has six major requirements for the works: First, the design models are passenger cars, all of which are new energy models; second, the design should reflect the theme of "technology and future beauty." The works should be creative; Third, the works should apply the design concept of "future life form" and proceed from the functional requirements of future life forms to form a "future life form concept explanation"; fourth, the "future life form concept description" Requires strong logic, clear concepts, leading vision, and closely integrates automotive design with future life styles. Fifth, the connotation of design works needs to be clearly expressed through the works themselves; and sixth, the design works require a high degree of completion and conform to the mainstream aesthetics. , highlighting the differences with the current models. The competition is divided into preliminary and semi-finals. There are 12 grand prizes and 20 finalists. In addition to the huge prize of up to 10,000 US dollars, the winning entries will be modeled on the "2010 (11th) Beijing International Automobile Exhibition. The meeting will be on display.
1. We have beeb exporting various Plastic Parts for more than 8 years.
2. Material:all kinds of plastic,such as ABS,PC+ABS,Acrylic,PVC,TPE,PBT
PC,PEPP,PPS,PA,PEI,POM and all other engineering plastics with or
without additives.
3. Samples are available based on drawing, sample or OEM codes.
Plastic Parts
Case Spare Parts, Plastic Bushings, Plastic Sprocket, Plastic Gear
Ningbo Combine Machinery Co.,Ltd. , http://www.combine-harvester-parts.com