Add abrasives to the waterjet to cut it even more profitably

Sand mixing is generally used to describe mixing one thing into another, but it can also be pejorative. Waterjets also have sand, which is abrasive.



When the lion step waterjet cuts thick and hard objects, it can be mixed with high-pressure water. The high-pressure water jet acts as an energy carrier to accelerate the abrasive. Each abrasive hits the workpiece surface like a bullet. The sharp abrasive edges are at the workpiece. Material left scratches.



The heat generated by high-speed impact and cutting of the abrasive particles will be rapidly taken away by the high-speed water flow and will not cause thermal deformation and thermal damage to the workpiece. The waterjet is very fast and it is a full-fledged soft knife. With abrasives, the result can be imagined. Due to the wide range of applications for abrasive waterjets, their influence is enormous.


The abrasive materials used by Lions Waterjet are all natural materials, non-toxic and harmless. Waste water produced after use can be recycled, and it can also be used for harmless discharge.


In addition, the use of waterjet abrasives can be skillfully mastered in one day, and the equipment can be processed immediately to process all kinds of parts, which is most suitable for two-dimensional shapes.



You see, the water knife mixed with sand is not a taste of flowering bombs, fine high-pressure water jet + abrasive, is unbreakable water knife sand.