Liugong loader: find the "correct rhythm" seconds change "work artifact"

On June 12th, at a gold mining site in southwestern Guizhou, a CLG890H loader was carrying out “feeding” operations on a muddy site. The Liugong technicians on the side are training and guiding the users to increase production capacity and improve operation methods.

Construction Site

Liugong loader

On June 9th, the loader company received feedback from the Yungui office: The CLG890H loader of a new delivery machine in Guizhou Province, the user feedback machine has a long working cycle and low operating efficiency, and cannot meet the capacity requirements of its “feeding” station. Users are very anxious. After receiving the feedback, the loader company responded quickly and set up a technical team consisting of product supervisors, product managers, and skilled operators to quickly reach the user's construction site and work in the first place. Through on-the-spot observation and interview with the user, the machine was systematically checked at the same time. Finally, it was found that the customer feedback machine had a long working cycle time and low operating efficiency, and could not meet two key factors of its “feeding” station productivity requirements: It is the “feeding” operation here that has a long distance (approximately 400m~500m). The driver operates the machine whether it is a load transport or an empty vehicle. The entire vehicle speed is very slow, there is no speed change, and it takes a long time to travel. Time will eventually lead to a very long machine cycle time.

Liugong equipment in construction

Second, due to mine production and management requirements to strictly prohibit the transportation of materials, the driver did not shovel full buckets when shoveling materials. Each bucket had only 6-70% full material, and sometimes even only half of the amount of material. According to the feedback from the customer, the technical service team carefully and carefully answered the customer feedback questions, let the operating manipulators on-site conduct demonstrations, and conducted on-site training for the operating manipulators according to how the operating modes of the machine were selected. Through the actual operation of the CLG890H machine, the production capacity fully meets the “feed” station's supply requirements.

Find the "correct rhythm" second change "work artifact"

The CLG890H loader is designed with a variety of engine power modes, gearbox drive modes, and shift modes to suit a variety of complex operating conditions. It requires strength, speed, and speed to provide high productivity and operating capability. The performance characteristics. The user did not play the machine's performance characteristics at all. After field tests and improved operation modes, the machine's feeding capacity was increased from 25 to 35 to 40 buckets/hour, and the single-cycle cycle time was reduced from 277 seconds to 190 seconds. The user directly called, almost seconds. Change "work artifact."

Job site

The technical service team actively responds to customer feedback questions and helps customers improve production efficiency. Not only does the customer have more confidence in Liugong products, but also allows users to have a more realistic and more appropriate experience for Liugong workers and Liugong enterprises. Said that in the future will be more firm support Liugong products. (This article is from Liugong)